Dropper Posts
syn.bike draws the seatpost inside the seat tube and checks, for the size on screen, that the post is inserted far enough and is not too long for your saddle height. That tells you which dropper travel each frame size can take.
Outlines covers the rest of the outline, including the seat tube shape and diameter.
Describe the Post
Open the Outlines tab in the left sidebar and find the Seatpost section.

| Field | What it is |
|---|---|
| Seatpost Diameter: | 30.9, 31.6 or 34.9 mm. The default is 31.6. |
| Dropper: | Custom, or one of the listed models. |
| Travel: | Travel in mm. A list for a listed model, a number above 0 for Custom. |
| Custom Travel: | Appears when you pick Custom in the Travel: list of a listed model, for a travel the list does not have. |
| Body Length: | Lower tube length in mm, above 0. Also the most the post can be inserted. Filled in and greyed out for a listed travel. |
| Exposed: | Lower tube showing above the top of the seat tube, in mm. Not negative. |
| Position: | A slider from 0 (fully dropped) to the full travel, in 1 mm steps. |
Seatpost Diameter: and Dropper: apply to every size of the bike. The other fields belong to the size on screen, so a small frame can carry a shorter post than a large one. Change the size with Switch Size at the bottom of the Geometry tab or with Frame Size: in the drivetrain menu.
Listed Models
A listed model brings the maker's body length and minimum insertion for each travel and diameter.
| Dropper | Travels (mm) | Travel reduction |
|---|---|---|
| OneUp V3 | 90, 120, 150, 180, 210, 240 | Up to 20 mm, in 10 mm steps |
| Fox Transfer | 120, 150, 180, 210, 240 (no 240 in 30.9) | Up to 25 mm, in 5 mm steps |
| Fox Transfer Neo | 100, 125, 150, 175, 200, 225 (no 100 in 34.9) | None |
| RockShox Reverb AXS | 100, 125, 150, 175, 200, 225, 250 | None |
| RockShox Reverb C1 | 100, 125, 150, 175, 200 | None |
| PNW Loam | 125, 150, 175, 200, 225 | Up to 25 mm, in 5 mm steps |
- The Travel: list includes the reduced settings. An entry such as
160 (180)is the 180 mm post set to 160 mm of travel. - Picking a travel puts the size on that post, fully extended.
- Picking a different Dropper: moves every size to the listed post nearest its current travel, fully extended, in one undo step.
- Changing Seatpost Diameter: refits the body length of each listed post. If a post is not made in the new diameter, that size keeps its lengths and its Travel: changes to
Custom.
Custom Posts
With Dropper: on Custom, type Travel: and Body Length: yourself. A bike with no dropper set is drawn this way, with 200 mm of travel and a 278 mm body. Switching from a listed model to Custom keeps the numbers you had.
The insertion check does not run for a custom post, or for a listed model whose Travel: is Custom, because neither has a maker's minimum insertion.
Exposed Length
Left alone, Exposed: is set so the saddle sits at Nominal Saddle Height (from the Geometry tab) with the post fully extended, between 0 and the body length.
Type a value to pin the post at your own height for that size. Click the reset icon (Reset to the saddle height) on that row to go back to the automatic value.
Move the Post
Two sliders raise and lower the dropper, and they are the same control:
- Position: in the Seatpost section.
- Dropper Travel: in the drivetrain menu, which opens from the gear-shaped button (Show drivetrain settings) at the bottom right of the Bike view. It appears only while Show Seatpost is ticked in the same menu.

Slide to 0 to see the saddle fully dropped, for instance to look at the gap to the rear tire at bottom-out (the end of the rear travel). syn.bike does not check the saddle or post against the tire, linkage or shock, so judge those clearances by eye.
The position is saved with the bike for each size, and a slide is one undo step. Unticking Show Seatpost hides the post and its warnings. Drivetrain describes the rest of that menu.
Dropper Post Warnings
Problems with the post appear at the top left of the Bike view under WARNING:. They cover the size on screen only, so switch through the sizes to check each one.

Short of Minimum Insertion
Dropper 54.8 mm short of its 90 mm minimum insertion
At your saddle height, less of the post is in the frame than the maker allows. The inserted length is Body Length: minus Exposed:.
Pick a longer travel, which leaves less of the lower tube exposed. If no listed travel clears the warning, the top of the seat tube is too low for that saddle height. This check runs for listed posts only.
Too Long for the Saddle Height
Dropper too long: saddle sits 11.2 mm above the nominal height even fully inserted
Even fully inserted, the extended post puts the saddle above Nominal Saddle Height by the amount shown.
Pick a shorter travel, or a reduced setting of the same post. Custom posts are checked as well.
Neither warning shows for a difference of 1 mm or less. Both are hidden while Show Seatpost is unticked or Wireframe Mode is on.