# Dropper Posts

> Describe a dropper post in syn.bike, check its insertion and saddle height on each frame size, and move it through its travel in the Bike view.

syn.bike draws the seatpost inside the seat tube and checks, for the size on screen, that the post is inserted far enough and is not too long for your saddle height. That tells you which dropper travel each frame size can take.

[Outlines](https://syn.bike/docs/outlines.md) covers the rest of the outline, including the seat tube shape and diameter.

## Describe the Post

Open the **Outlines** tab in the left sidebar and find the **Seatpost** section.

![The Seatpost section with a listed dropper model selected and its travel, body length, exposed length and position](https://syn.bike/images/docs/dropper-seatpost-light.png)

| Field | What it is |
|---|---|
| **Seatpost Diameter:** | `30.9`, `31.6` or `34.9` mm. The default is `31.6`. |
| **Dropper:** | `Custom`, or one of the listed models. |
| **Travel:** | Travel in mm. A list for a listed model, a number above 0 for `Custom`. |
| **Custom Travel:** | Appears when you pick `Custom` in the **Travel:** list of a listed model, for a travel the list does not have. |
| **Body Length:** | Lower tube length in mm, above 0. Also the most the post can be inserted. Filled in and greyed out for a listed travel. |
| **Exposed:** | Lower tube showing above the top of the seat tube, in mm. Not negative. |
| **Position:** | A slider from `0` (fully dropped) to the full travel, in 1 mm steps. |

**Seatpost Diameter:** and **Dropper:** apply to every size of the bike. The other fields belong to the size on screen, so a small frame can carry a shorter post than a large one. Change the size with **Switch Size** at the bottom of the **Geometry** tab or with **Frame Size:** in the drivetrain menu.

### Listed Models

A listed model brings the maker's body length and minimum insertion for each travel and diameter.

| Dropper | Travels (mm) | Travel reduction |
|---|---|---|
| OneUp V3 | 90, 120, 150, 180, 210, 240 | Up to 20 mm, in 10 mm steps |
| Fox Transfer | 120, 150, 180, 210, 240 (no 240 in 30.9) | Up to 25 mm, in 5 mm steps |
| Fox Transfer Neo | 100, 125, 150, 175, 200, 225 (no 100 in 34.9) | None |
| RockShox Reverb AXS | 100, 125, 150, 175, 200, 225, 250 | None |
| RockShox Reverb C1 | 100, 125, 150, 175, 200 | None |
| PNW Loam | 125, 150, 175, 200, 225 | Up to 25 mm, in 5 mm steps |

- The **Travel:** list includes the reduced settings. An entry such as `160 (180)` is the 180 mm post set to 160 mm of travel.
- Picking a travel puts the size on that post, fully extended.
- Picking a different **Dropper:** moves every size to the listed post nearest its current travel, fully extended, in one undo step.
- Changing **Seatpost Diameter:** refits the body length of each listed post. If a post is not made in the new diameter, that size keeps its lengths and its **Travel:** changes to `Custom`.

### Custom Posts

With **Dropper:** on `Custom`, type **Travel:** and **Body Length:** yourself. A bike with no dropper set is drawn this way, with 200 mm of travel and a 278 mm body. Switching from a listed model to `Custom` keeps the numbers you had.

The insertion check does not run for a custom post, or for a listed model whose **Travel:** is `Custom`, because neither has a maker's minimum insertion.

### Exposed Length

Left alone, **Exposed:** is set so the saddle sits at **Nominal Saddle Height** (from the **Geometry** tab) with the post fully extended, between 0 and the body length.

Type a value to pin the post at your own height for that size. Click the reset icon (**Reset to the saddle height**) on that row to go back to the automatic value.

## Move the Post

Two sliders raise and lower the dropper, and they are the same control:

- **Position:** in the **Seatpost** section.
- **Dropper Travel:** in the drivetrain menu, which opens from the gear-shaped button (**Show drivetrain settings**) at the bottom right of the **Bike** view. It appears only while **Show Seatpost** is ticked in the same menu.

![The drivetrain menu with the Show Seatpost checkbox ticked and the Dropper Travel slider at the bottom](https://syn.bike/images/docs/dropper-travel-menu-light.png)

Slide to `0` to see the saddle fully dropped, for instance to look at the gap to the rear tire at bottom-out (the end of the rear travel). syn.bike does not check the saddle or post against the tire, linkage or shock, so judge those clearances by eye.

The position is saved with the bike for each size, and a slide is one undo step. Unticking **Show Seatpost** hides the post and its warnings. [Drivetrain](https://syn.bike/docs/drivetrain.md#the-drivetrain-in-the-bike-view) describes the rest of that menu.

## Dropper Post Warnings

Problems with the post appear at the top left of the **Bike** view under **WARNING:**. They cover the size on screen only, so switch through the sizes to check each one.

![The Bike view with a dropper warning at the top left and the post sitting high in the seat tube](https://syn.bike/images/docs/dropper-warning-light.png)

### Short of Minimum Insertion

**Dropper 54.8 mm short of its 90 mm minimum insertion**

At your saddle height, less of the post is in the frame than the maker allows. The inserted length is **Body Length:** minus **Exposed:**.

Pick a longer travel, which leaves less of the lower tube exposed. If no listed travel clears the warning, the top of the seat tube is too low for that saddle height. This check runs for listed posts only.

### Too Long for the Saddle Height

**Dropper too long: saddle sits 11.2 mm above the nominal height even fully inserted**

Even fully inserted, the extended post puts the saddle above **Nominal Saddle Height** by the amount shown.

Pick a shorter travel, or a reduced setting of the same post. Custom posts are checked as well.

Neither warning shows for a difference of 1 mm or less. Both are hidden while **Show Seatpost** is unticked or **Wireframe Mode** is on.
